ALITA 8685 – High-Strength Unsaturated Polyester Resin for Simulated Granite and Marble

Principal Properties & Application:

ALITA 8685 resin is an unsaturated polyester resin primarily made from phthalic anhydride. It has moderate viscosity and reactivity. ALITA 8685 resin exhibits good colorability, high strength, and excellent toughness. It is suitable for the production of simulated granite, marble products, and engineered stone.

Technical Specifications of Liquid Resin:

Note: Curing system in GT test: Accelerator (0.6%Co/Naph): 2%;Hardener Nouryon M-50:2%;

Physical Properties of Casting (for reference only)：

Instruction and attention:

1.  

   1. ALITA 8685 resin contains wax and does not contain accelerators or thixotropic agents.

1. 1. Cutting and polishing should be performed after thorough curing during the production process.

1. 1. Post-cure at a temperature of 60-70°C for a minimum of 3 hours for optimal product performance.

1. 1. Moisture absorption by fillers should be avoided as high water content can affect product curing, resulting in decreased performance.

Handling and Storage:

This resin contains ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.
Drums – It is highly recommended that all material is stored at stable temperatures below 25°C (77°F). Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture pick-up and monomer loss. Rotate stock.